乐博体育

logo
×

icon2
nav_btn
m32
PRODUCTS

 

20171216093123_6155

YG825L button test machine (Mechanical)

Video
Gallery
360°Show
×
×
131578615040828331
131578615040828331
×
20171216093123_6155
Applicable scope
Test principles and standards
Instrument characteristics
Technical Parameters
Configuration list
This test is to define the responsibility of the manufacturer to ensure clothing buttons, buttons and fasteners can be properly fixed in the garment, prevent from dangerous clothing buttons, baby swallowed a chance. Therefore, all the buttons, buttons and fixings on the garment must be tested by the button strength tester.
16 CFR 1500.51-53  ASTM PS79-96
Standard configuration
①Tension seat; ②Push and pull meter; ③Three claw forceps; ④Tension forceps; ⑤Bottom fabric jig; ⑥Correction weight; ⑦Outer size: 280×220×780mm
Operational guidance
①Install the fixture with the test button and lock the test sample to the base.
②Put down the clamp, fasten the button and pull it up. Each button can bear at least 17 pounds pulling force (i.e. 7.72kg) and need to keep 10 seconds, without any traces of loosening or breakage. At the same time, at least 20 buttons should be tested at the same time.
③If one of the buttons is loosened or damaged or must be retested, it must be retested.
Tel:

+86-0595-68902555

Quanzhou Meibang Instrument Co., Ltd.
Address:National university science park, Daxiamei, Nanan, Quanzhou, Fujian. P.R. China
Share:
20231027091905_6328 20231027091909_5703
? 2023 Quanzhou Meibang Instrument Co., Ltd. Copyright 工信登记:闽ICP备10202419号-1 公安登记:ghj闽公网安备 35058302350905号
【网站地图】